PR8000 9mt 4x2000W METAL HALIDE
01-04-2011
48
49
11.4 HYDRAULIC GEAR BOX
Engine hydraulic gear box
Oil pressure gauge indicator
Regularly check the level of hydraulic oil. Add oil if the level dips down lower than half a tank (total
tank capacity 20L).
An inspection must be performed at least 30 minutes after the engine has been turned off and with
the telescopic mast lowered.
When topping up the oil, use only hydraulic oil with a high index of viscosity and adapt to use for +
46°C to – 46°C temperatures. We advised the use of the oil “Shell Tellus Oils TX 46”. It is sufficient
to fill the tank with approximately 16Ll of oil.
Always use protective gloves during the replacement and inspection of the motor oil levels.
To Next Page
Loading...
