PR POWER PR8000 - Change Engine Oil

PR8000 9mt 4x2000W METAL HALIDE
29
TL116-11-00-03
01-04-2011
57
58
59
11.8 CHANGE ENGINE OIL
Items
Description
57
Engine oil drain cap
58
Manual pump for extracting the oil from the engine
59
Wiggins Fast Fuel (*)
Use the manual pump to change oil.
Remove the discharge cap (57) from the pump and apply a rubber hose (not supplied) to the top.
Place the hose out of the lighting tower and into a container to store the oil. Unscrew the oil cap
and discharge the oil by pumping it.
WARNING: After using the pump, screw the cap back securely before restarting the engine.
Contact with the engine oil can damage your skin. Wear gloves when handling engine oil. If you
come in contact with the engine oil, wash it off immediately.
For the correct type of oil to use in the lighting towerr, refer to the Kubota Engine Owner’s Manual.
Change oil (7L oil sump capacity) after the initial 50 hours of operation and every 200 hours or 1
year thereafter.
Do not discharge polluting liquids into the atmosphere.
If the lighting is switched off for a long period (more than one year), we suggest keeping the oil in
the engine to avoid oxidizing effects.
Up to 25° C
SAE 30 - SAE 10W-30 - SAE 10W-40
Between 0° C and 25° C
SAE 20 - SAE 10W-30 - SAE 10W-40
Down to 0° C
SAE 10W - SAE 10W-30 - SAE 10W-40
(*) Note: The Wiggins Fast Fuel is an option only.