EasyManua.ls Logo

PR POWER PR8000 - General Danger Information; Danger of Burns; Danger of Electrocution; Danger of Injury

PR POWER PR8000
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PR8000 9mt 4x2000W METAL HALIDE
9
TL116-11-00-03
01-04-2011
6. GENERAL DANGER INFORMATION
6.1 DANGER OF BURNS
Do not touch hot surfaces with hands e.g. silencers and engine when it is operating.
Do not touch the floodlights when turned on.
Always use gloves.
6.2 DANGER OF ELECTROCUTION
Do not touch electrical parts, it may cause an electric shock.
Do not touch the electric cables when the lighting tower is operating.
6.3 DANGER OF INJURY
Do not remove the protective guards placed on the moving parts including, air intakes and fan
belts.
Do not clean or attempt maintenance on moving parts.
Use appropriate clothing and safety wear, whilst operating the lighting tower.
6.4 WARNING OF FIRE OR EXPLOSION DURING REFUELING
Turn off the engine before refueling.
Do not smoke during refueling.
Refueling must be conducted in a way that does not cause fuel spillage.
In the event of fluid spillage during refuelling, dry and clean parts as required.
Check that there isn’t any spillage of fuel and hoses and hoses are not damaged.
6.5 NOISE
Use ear plugs or ear muffs for noise protection.
6.6 EXHAUST FUMES
The exhaust fumes are dangerous for your health. Maintain a safe distance from the emission
zone.
In the event the lighting tower is used in a closed area, ensure that the exhaust fumes can be
easily dispersed in a safe manner.

Table of Contents

Related product manuals