PR POWER PR8000 - Troubleshooting Guide; Main Issues

PR8000 9mt 4x2000W METAL HALIDE
39
TL116-11-00-03
01-04-2011
14. TROUBLESHOOTING GUIDE
Listed below are the most common issues that may occur during operation of the lighting tower
and possible remedies.
If the engine does not operate correctly, we recommend you follow the maintenance operations
and the maintenance schedules as described in the engine “Operator’s manual” in chapter
“MAINTENANCE”, in order to find and to eliminate the cause of the problem.
14.1 MAIN ISSUES
FAULT
• When turning the start key to the ON position, the ignition indicator light does not light up and
the starter motor does not work.
CAUSE
The battery is disconnected.
REMEDY
Open the door and connect the battery.
CAUSE
The battery is not charged.
REMEDY
Recharge the battery.
CAUSE
The battery is defective.
REMEDY
Replace the battery.
CAUSE
The starter motor does not work.
REMEDY
Contact Project Rentals.
CAUSE
The emergency stop button is pressed.
REMEDY
Check that the stop button is armed. It it is not armed, turn the grip handle in clockwise direction.
CAUSE
There are disconnected cables in the electrical system.
REMEDY
Check the electrical system to locate the disconnected cables (Refer to the wiring diagram).