PR POWER PR8000 - Page 40

PR8000 9mt 4x2000W METAL HALIDE
40
TL116-11-00-03
01-04-2011
FAULT
• The starter motor works, but the engine does not start.
CAUSE
Possible lack of fuel in the tank.
REMEDY
Refuel the machine.
CAUSE
Fuel filter is dirty.
REMEDY
Replace the fuel filter.
CAUSE
The fuel pump does not work.
REMEDY
Check the electrical connection of the pump and eventually if problem continues contact
PR POWER.
FAULT
• The starting of the engine is difficult.
CAUSE
The air cleaner element is dirty.
REMEDY
Clean up the element or replace it.
CAUSE
Injection pump wear.
REMEDY
Do not use poor quality fuel as it will cause pump wear. Check the fuel injection pump element and
replace if necessary.
CAUSE
Over heating of moving parts.
REMEDY
Check lubricating oil system.
Check to see if lubricating oil filter is working properly or replace it.