To Next PageTo Next PageWhat does error E14 mean on PRACTIXX Lawn Mower?
Error E14 on your PRACTIXX Lawn Mower indicates that the cutting area is outside the boundary. Turn off the mower. Adjust the boundary lines or reduce the mowing area to the specified zone. Turn the mower back on and press “START” followed by “OK.”
What to do if PRACTIXX Lawn Mower shows error E5?
Error E5 on your PRACTIXX Lawn Mower means the mower was lifted. Turn the mower off. Move it to an area free of obstacles. Press the “START” button and then the “OK” button.
What does error E6 mean on PRACTIXX Lawn Mower?
Error E6 on your PRACTIXX Lawn Mower means the roll-over sensor was triggered. Position the mower correctly. Press the “START” button and then the “OK” button.
How to resolve error E7 on PRACTIXX Lawn Mower?
Error E7 on your PRACTIXX Lawn Mower indicates that the inclination sensors were triggered. First, switch the mower off. Then, move it to a level area on your lawn. Switch the mower back on. Press the “START” button and then the “OK” button.
Why does my PRACTIXX Lawn Mower start at the wrong time?
If your PRACTIXX Lawn Mower starts at unusual or wrong times, the date and time may be set incorrectly. Set the correct date and time to resolve this issue.
General| Brand | PRACTIXX |
|---|---|
| Model | PX-RRM-2000WI |
| Category | Lawn Mower |
| Language | English |
Details about the manufacturer, customer greeting, and initial notes.
Information on product description, scope of delivery, and intended use.
General user responsibilities, safety rules for operating personnel, and prohibited actions.
Specific safety guidelines for operating the robotic lawnmower in various conditions.
Critical safety information regarding the product's battery and charging system.
Technical details of the robotic lawnmower, app control, WiFi, and battery.
Information on the power supply, IP protection classes, and overall weight.
Guidance on correctly positioning and securing the charging station.
Steps for connecting the boundary wire to the charging station.
Instructions for laying out the boundary wire, including general notes and installation tips.
How to lay the boundary wire around obstacles like trees or flower beds.
Guidelines for managing slopes and final connection of the charging station.
Explains the meaning of different LED status lights on the charging station.
Steps to perform before the initial commissioning of the lawnmower.
Guide to initial startup, quick start procedure, cutting height adjustment, and stopping the mower.
Instructions on switching the mower on and managing essential settings like PIN and time.
Detailed steps for changing the PIN code and setting the date and time.
Adjusting mowing times, edge mowing, rain sensor, and ultrasound sensor settings.
Information on operating the lawnmower via the app, including registration and initial setup.
Details on app communication, data transmission, and core app functions like mowing plans.
How to manually switch functions like rain sensor, LED, and ultrasound sensor on/off.
Procedures for resetting device settings to factory defaults and cleaning the lawnmower.
Guidelines for transporting, storing the mower, and handling the battery.
Procedures for electrical repairs, replacing blades, and battery management.
Instructions for software updates via USB and information on wear parts.
Regulations and recommendations for disposing of packaging and electrical equipment.
A table listing common faults, their possible causes, and remedies for the robotic lawnmower.
Detailed explanations of specific error codes and troubleshooting steps for each.
