4.2 General Instrucons
The oven must be installed on a surface or counter that supports its weight of
approximately 194lb (88 Kg).
Do not block the air inlets or outlets of the unit.
The oven must not be posioned near stoves, deep fryers, hot plates and
other equipment that releases fat, fumes and heat. The venlaon, electrical
panel and motor vents must be far from these heat sources to prevent
damage to the electrical system of the appliance.
The oven must be installed in a leveled and well venlated area.
The installaon of the equipment in a non-suitable place can result in the loss
of warranty.
·
·
·
·
·
INSTALLATION AND OPERATION MANUAL
14
To Next Page
Loading...
