Praxair PHOENIX 401 BASIC PULS forceArc - User Manual

GB
Operating instructions
Machines for MIG/MAG and MMA welding
PHOENIX 401 BASIC PULS forceArc;
PHOENIX BASIC DRIVE 4 / 4L
N. B. These operating instructions must be read before commissioning.
Failure to do so may be dangerous.
Machines may only be operated by personnel who are familiar with the appropriate safety
regulations.
The machines bear the conformity mark and thus comply with the
• EC Low Voltage Directive (73/23/EEC)
• EC EMC Directive (89/336/EEC)
In compliance with IEC 60974, EN 60974, VDE 0544 the machines can be used in environments
with an increased electrical hazard.
© 2006 Subject to alteration.
Item No.: 099-004838-PRA01
Dated: 10.04.06

Summary

Safety and Compliance

Operating Instructions Overview

Introduces the manual for MIG/MAG and MMA welding machines.

EU Conformity Declaration

Formal statement of compliance with EU directives for the welding machines.

General Safety Precautions

Essential rules for safe operation, accident prevention, and hazard awareness.

Health and Environmental Safety

Addresses risks from fumes, gases, and electromagnetic fields during welding.

Technical Specifications

PHOENIX 401 Specifications

Detailed technical specifications for the PHOENIX 401 BASIC PULS forceArc welding machine.

PHOENIX BASIC DRIVE 4;4 L Specifications

Technical specifications for the PHOENIX BASIC DRIVE 4 and 4L welding machines.

Machine Description

PHOENIX 401 Component Views

Illustrates and identifies the front and rear components of the PHOENIX 401.

PHOENIX BASIC DRIVE 4 L Component Views

Shows and labels the front and rear components of the PHOENIX BASIC DRIVE 4L.

Functional Characteristics

Wire Feed and Machine Controls

Details the operating elements for wire feed control and machine interface.

MIG;MAG Welding Modes and Parameters

Explains MIG/MAG tasks, parameters, and operational sequences.

TIG Welding Modes and Sequences

Covers TIG welding arc ignition, function sequences, and operating modes.

MMA Welding Features

Describes MMA specific features like Arcforcing, Hotstart, and Antistick.

Remote Control Operation

Details the usage and functions of the R10 manual remote control unit.

JOB Reset Procedures

Explains how to reset welding tasks (JOBs) to factory default settings.

Setup, Maintenance, and Troubleshooting

Commissioning Procedures

Guides through initial setup, installation, and connection procedures for the machine.

Maintenance and Safety Testing

Outlines routine maintenance, cleaning, and mandatory safety testing procedures.

Troubleshooting Error Codes

Lists common error messages, their causes, and recommended corrective actions.

Accessories, Documentation, and Schematics

Accessories, Options, and Software

Lists optional accessories, connection cables, and software for data management.

PHOENIX 401 Circuit Schematics

Provides detailed electrical circuit diagrams for the PHOENIX 401 model.

PHOENIX BASIC DRIVE 4;4 L Schematics

Presents electrical circuit diagrams for the PHOENIX BASIC DRIVE 4/4L models.

Praxair PHOENIX 401 BASIC PULS forceArc Specifications

General

Brand	Praxair
Model	PHOENIX 401 BASIC PULS forceArc
Category	Welding System
Language	English