30
9. Before removing the strip from
the meter, you can press Set
button to set the test as BE-
FORE MEAL TEST
, or AFTER
MEAL TEST
, or a CONTROL
SOLUTION TEST
. If not set,
the default of the meter is BE-
FORE MEAL TEST
.
Set
Mem
10. After setting complete, re-
move the strip from meter
and discard the used strip
and lancet safely in a punc-
ture resistant container.
Set
Mem
31
11. After removing the strip,
the result will be transmit-
ted to database through GSM
automatically. If OK appears
on screen, the transmission
succeeds. If Err appears,
please see Display Messages
and problem solving guide to
eliminate error.
12. The testing range of the me-
ter is from 20 to 600 mg/dL
(1.1 to 0 33.3 mmol/L). If HI is
displayed, your blood glucose
result may be higher than
33.3 mmol/L or 600 mg/dL.
If LO is displayed, your blood
glucose result may be lower
than 1.1 mmol/L or 20 mg/dL.
Set
Mem
Set
Mem
To Next Page
Loading...