page 29
During Setup mode, the Incline
▲▼▲▼
▲▼▲▼
▲▼ keys are used for data selection. Pressing
either
▲ ▲
▲ ▲
▲ or
▼▼
▼▼
▼ key does not affect the incline. However the
▲ ▲
▲ ▲
▲ or
▼▼
▼▼
▼ keys do affect what
appears on the display. Refer to
Setup Mode and Prompts
on page 26.
SELECT keys 1 and 2: While the Precor banner is displayed, the SELECT keys act
as User I.D. 1 and 2 (respectively). During a course, the Select keys change what
items appear on the display. Refer to
Changing the Display Features Using the
SELECT Key
.
User I.D. keys 1 and 2 — While setting up for your workout, the SELECT keys act as
User I.D. 1 and 2 (respectively). Choosing a User I.D. enables the treadmill to identify
you and remember your last course, workout time, weight, and age. If another person
works out on the M9.33, he or she can select a User I.D. of their own and personalize
their workout session.
To learn about choosing the display items and setting up an automatic scan of the
workout data, refer to
Changing the Display Features Using the SELECT Key.
RESET: Provides access to diagnostics (see
Advanced Programming Techniques
on
page 31), and lets you exit a course or the Setup mode prematurely. If you press
Reset while in a course, you exit the course and access the Workout Summary
display. Press Reset again to exit Workout Summary and return to the Precor
banner or wait for the ten minute time-out. Note that if you press Reset during the
Setup mode, you also return to the Precor banner. None of the display information
you may have changed in Setup Mode is saved with the User I.D.
QUICK START: Quick Start lets you bypass the Setup prompts and start your
workout immediately using the Manual course.
Default values apply.
QUICK START Default Values
Prompts Default Value
COURSE Manual
TIME No limit (i.e. INFINITE)
WEIGHT 150 lbs. (68 kg.)
AGE 0 : A valid Age must be entered to utilize the Smart Rate
®
display. If
Quick Start is pressed
after
an “Age”
is entered, then the Smart Rate
display will appear when you wear the POLAR
®
chest strap. If no “Age”
entry occurs, then Smart Rate
LED’s light but are not activated. Note that
the POLAR
®
chest strap is available through your Precor dealer. Refer to
Obtaining Service
on page 9.
The Quick Start key can be pressed any time during the Setup prompts. For more
information, refer to page 23,
The Setup Mode and the Quick Start Feature
.
ENTER: Workout specific prompts which appear on the display need to be addressed
and then “entered” into the unit's memory by pressing the Enter key. Refer to
Quick
Steps to Working Out
on page 21.
Diagram 17
M9.33 keypad.
Keypad keys
The keys on the keypad let you:
• control your workout session,
• answer prompts prior to starting a course,
• determine which display features appear,
• prematurely end a course, and
• adjust the incline and speed levels.
Quick Start: When pressed at the Precor
banner, the running belt begins moving
after a three second delay. Smart Rate
®
is
inactive and default values apply.
To Next Page
Loading...
