Precor C932i Service Manual

C932i, C946i Treadmill
20077-112 Page 23
21. If the display face has been replaced and the same key is still not functioning, replace the
upper PCA.
22. If you have performed steps 18 - 22 and the same key is still not functioning, contact Precor
customer support for assistance.
23. Remove the keypad cable from the upper PCA. See Diagram 5.1.
24. Set the treadmill’s on/off switch in the “on” position.
25. If the STUCK KEY message is no longer displayed, replace the display face.
26. If the STUCK KEY is still being displayed with the keyboard cable disconnected, replace the
upper PCA.
27. If you have performed steps 23 - 26 and the STUCK KEY message is still being displayed,
contact Precor customer support for assistance.

Precor C932i Specifications

Power

motor power	2.75 hp
power supply	120 VAC (50/60Hz)
current	15 Amps

Performance

speed range	0.5 - 11 mph (1 - 18 kph)
incline range	0 - 15% grade

Weight and Dimensions

length	79 in (201 cm)
width	34 in (84 cm)
height	55 in (140 cm)
weight	280 lbs (126 kg)
shipping weight	320 lbs (144 kg)
belt dimensions	57 in x 20 in (145 cm x 51 cm)