Precor C932i - Procedure 2.1 - Accessing the Diagnostic Software

C932i, C946i Treadmill
20077-112 Page 5
Procedure 2.1 - Accessing the Diagnostic Software
The treadmill's diagnostic software consists of the following modes:
• Display Test
• Keyboard Test
• Heart Rate Test
• Belt Speed
• Incline
Procedure
1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2. Using the RESET key and the numeric keypad, press keys RESET,5,1,7,6,5,7,6,1,
sequentially.
3. Hardware Validation will scroll across the display followed by DISPLAY TEST.
Diagram 2.1 - C946i Treadmill Display
Numeric Keypad
, Key
OK Key
Reset Key
Back Key