Precor C932i Service Manual

C932i, C946i Treadmill
Page 6
Diagram 2.2 - C932i Treadmill Display
4. Press the OK key, the upper most group of LED’s will illuminate on the display. Check the
display to ensure that all LED segments are illuminated.
5. Press the OK key four more times to display the remaining LED groups. Check each display
group to ensure that all LED segments are illuminated.
6. Press the Clear key (C932i) or BA.C.K key (C946i) then the  key, KEYBOARD TEST will
scroll across the display.
7. Press the OK key, a representation of all of the keys on the console will be displayed.
Pressing a key on the console will cause the representation of that key to go off. Press all of
the keys on the console to ensure that all of the keys are functioning.
8. Press and hold the Clear key (C932i) or BA.C.K key (C946i) for 3 seconds, then the  key,
HEART RATE will be displayed.
, Key
Numeric
Keypad
OK Key
Clear Key
Reset Key

Precor C932i Specifications

Power

motor power	2.75 hp
power supply	120 VAC (50/60Hz)
current	15 Amps

Performance

speed range	0.5 - 11 mph (1 - 18 kph)
incline range	0 - 15% grade

Weight and Dimensions

length	79 in (201 cm)
width	34 in (84 cm)
height	55 in (140 cm)
weight	280 lbs (126 kg)
shipping weight	320 lbs (144 kg)
belt dimensions	57 in x 20 in (145 cm x 51 cm)