Precor C932i Service Manual

C932i, C946i Treadmill
20077-112 Page 7
9. Grasp both of the heart rate grips on the handlebar, after a couple of seconds the heart rate
will be displayed in the heart rate display and flashing heart (C932i) or smart rate bar
(C946i).
10. Use chest strap transmitter or a test transmitter to test the wireless heart rate function, after
a couple of seconds the heart rate will be displayed in the heart rate and smart rate displays.
11. Press the Clear key (C932i) or BA.C.K key (C946i) then the  key, BELT SPEED will scroll
across the display.
12. BELT SPEED test. Press the OK key, the console will display the power bits (PWRB), Press
the SPEED  key to start the treadmill running belt, the display will indicate the power bits,
the elapsed time and the actual speed (in either miles per hour or kilometers per hour
depending on the club parameters setting, see Procedure 2.3).
13. Press the  key, the console will display the motor current (AMPS), the elapsed time and
the actual speed then the  key, INCLINE will be displayed.
14. Press the Clear key (C932i) or BA.C.K key (C946i) to exit the belt speed test.
15. INCLINE test. The console will display the analog to digital (A/D) incline position number
and the incline position in percent of incline. Press the inline , keys to operate the incline
through out its range.
16. Press the Clear key (C932i) or BA.C.K key (C946i) to exit the incline test.
17. If the incline is greater than 0%, AUTOLEVEL will be displayed and the incline will return to
0%.
18. Press the RESET key or the CLEAR key (C932i) or the BA.C.K key (C946i) to exit the
hardware validation test.

Precor C932i Specifications

Power

motor power	2.75 hp
power supply	120 VAC (50/60Hz)
current	15 Amps

Performance

speed range	0.5 - 11 mph (1 - 18 kph)
incline range	0 - 15% grade

Weight and Dimensions

length	79 in (201 cm)
width	34 in (84 cm)
height	55 in (140 cm)
weight	280 lbs (126 kg)
shipping weight	320 lbs (144 kg)
belt dimensions	57 in x 20 in (145 cm x 51 cm)