Precor C932i Service Manual

C932i, C946i Treadmill
20077-112 Page 9
12. Press the OK key. The software part number will be displayed as XXXXX-XXX.
13. Press the Clear key (C932i) or BA.C.K key (C946i) then the  key, U-BASE SW will be
displayed.
14. U-BASE SW display. This display the installed version of upper PCA software.
15. Press the OK key. The software part number will be displayed as XXXXX-XXX.
16. Press the Clear key (C932i) or BA.C.K key (C946i) then the  key, LOWER SW will be
displayed.
17. LOWER SW display. This display the installed version of lower PCA software.
18. Press the OK key. The software part number will be displayed as XXXXX-XXX.
19. Press the Clear key (C932i) or BA.C.K key (C946i) then the  key, SER. NUMBER will be
displayed.
20. SER. NUMBER display. Press the OK key.
21. The treadmill’s serial number will be displayed. The serial number may be incorrect or not
displayed if the upper PCA has been replaced. Please note, the serial number function may
not be equipped, if not equipped no serial number will be displayed. The serial number can
be entered via the Windows CSAFE program, see Procedure XX.
22. Press the Clear key (C932i) or BA.C.K key (C946i) then the  key, USAGE LOG will be
displayed
23. USAGE LOG display. Press the OK key.
24. Use the , keys to move through the list of programs. A message will scroll describing the
program, the number of times and the number of minutes the program was used.
25. Press the Clear key (C932i) or BA.C.K key (C946i) then the  key, ERROR LOG will be
displayed.
26. ERROR LOG display. Press the OK key, the quantity of errors in the log will be displayed.
27. Press the OK key, the most recent error will be displayed first.
28. Use the , keys to move through the list of errors. The error messages will list the error
name, the odometer reading when the error occurred, the hour meter when the error
occurred and the drive motor current reading when the error occurred.
29. Press the RESET key to exit the information display.

Precor C932i Specifications

Power

motor power	2.75 hp
power supply	120 VAC (50/60Hz)
current	15 Amps

Performance

speed range	0.5 - 11 mph (1 - 18 kph)
incline range	0 - 15% grade

Weight and Dimensions

length	79 in (201 cm)
width	34 in (84 cm)
height	55 in (140 cm)
weight	280 lbs (126 kg)
shipping weight	320 lbs (144 kg)
belt dimensions	57 in x 20 in (145 cm x 51 cm)