Attaching the Shroud to the Weight Stack
CAUTION: Do not use power tools to tighten screws attaching the weight
stack shroud components. Using power tools may void the Precor warranty.
A Shroud Assembly Guide is included with your equipment. Please refer to these
instructions to attach the plastic shroud to your weight stack.
Verifying Operation of the Equipment
Once assembly is complete, verify safe operation by checking the following
points:
Cable tension is correct and the cable is moving smoothly on its pulleys.
The movement arm is stable and moves smoothly through its range of
motion.
CAUTION: If the cable does not slide smoothly throughout its path, stop
equipment use immediately and recheck the cable assembly.
Completing Assembly
To Next Page
Loading...
Need help?
General
