Setting Up Your Equipment
23
Setting Up Your
Equipment
After the console is installed, it needs the following
information to work correctly:
Your measurement preferences
The model of equipment connected to the console
You will need to enter this information before you can
start to use the equipment. When you do, you will also
have an opportunity to change the equipment’s other
settings.
As you set up the console, use the keys in the following
table to select and apply the settings you want.
If you want to … Press …
Switch between available choices The right and left
arrow keys
Make a selection or save a setting GO
Cancel out of the setup routine and
return to the Welcome prompt
RESET
To set up the console:
1. Turn the equipment on, if necessary.
2. Press the following keys in order:
– RESET
– ENTER
– Left Arrow
– Right Arrow
– WORKOUTS
To Next Page
Loading...
Need help?
General
