Precor EFX 222 User Manual

Getting Started
3
Hardware Kit (not to scale)
The hardware kit shipped with this equipment contains the fasteners and other
hardware components shown in the following table. Before you begin assembly,
make sure that your hardware kit is complete. If not, please contact Precor
Customer Support.
Table 1. Hardware Kit Contents
Fasteners
Quantity
Hex head screw
(M8 x 20 mm)
8
Flat washer (M8) 8
Buttonhead screw
(M8 x 12 mm)
6
Lock washer (M8) 6
Buttonhead screw
(¹₄-inch x ³₄-inch)
4
⁵₃₂-inch hex key 1
5 mm hex key 1
Double-ended wrench 1
Table 2. Additional Fasteners for all Models Except the EFX 221
Fasteners
Quantity
Buttonhead screw
(M10 x 20 mm)
2
Flat washer (M10) 2
Buttonhead screw
(M8 x 50 mm)
2
Flat washer (M8) 4
Locknut (M8) 2
6 mm hex key 1
Table 3. Additional Parts
Bottle holder Two handlebar caps (for all models
except the EFX 221)
Two wheel covers

Precor EFX 222 Specifications

General

Brand	Precor
Model	EFX 222
Category	Elliptical Trainer
Language	English