ID Description
Trim Landing Cover- left
Trim Landing Cover - right
Removal Instructions
The same procedure applies to both the left and right trim landing covers.
1. Remove the hood cover, see "Hood Cover Replacement" on page88.
2. Remove the trim landing cover #3 Phillips screw, washer, and bushing fastener hard-
ware. (missing or bad snippet)
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 94
6 Replacement Procedures
Covers and Panels Replacement
To Next Page
Loading...
Need help?
General