power cable thru the right cable housing opening (not the left opening) and install the
new fan.
3. Reinstall the fan grill onto the fan and secure with the four screw fasteners.
4. Reconnect the fan power cable and install the top cover onto the MC housing. Make
sure that the power cable is not pinched or damaged while snapping the top cover
into the housing tabs. Secure top cover using the one screw fastener.
5. Reinstall the Motor Controller, see "Motor Controller (MC) Replacement" on
page123.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 140
6 Replacement Procedures
Motor Controller Fan Replacement
To Next Page
Loading...
Need help?
General