5. Tension the running belt to specification and verify alignment and tracking, see "Run-
ning Belt Tension and Tracking Adjustment" on page67.
6. Reinstall the left and right Landing Trim covers, see "Covers and Panels Replace-
ment" on page86 and hood cover, see "Covers and Panels Replacement" on
page86,.
7. Do the Operation Verification tests (see "Operation Verification" on page24) and
return to service.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 187
6 Replacement Procedures
Take-up Roller Replacement
To Next Page
Loading...
Need help?
General