Precision Series / Energy Series EFX Owner's Manual:: EFX 447 / 245 24
Getting Accurate Heart Rate
Readings
Precor cannot guarantee the accuracy of any readings
you may get, but for best results, heart rate sensors
need to be securely in contact with your skin. Use the
following guidelines to make sure they are.
Note: You may have better results using a chest
transmitter strap.
To attach a chest strap:
Signals used by the chest strap
transmitter (or heart rate strap) may
interfere with pacemakers or other
implanted devices. Contact your
doctor, the manufacturer of the chest
strap, and the manufacturer of the
implanted device before using a chest
strap transmitter.
Important: Precor cardio equipment works with 5 KHz
chest straps only. It does not work with Bluetooth®-based
chest straps, which are designed for use with mobile apps.
Note: To receive an accurate reading, the strap needs
to be in direct contact with the skin on the lower
sternum (just below the bust line for women).
1. Carefully dampen the back of the strap with tap
water. Refer to the following figure.
Note: Do not use deionized water. It does not have
the proper minerals and salts to conduct electrical
impulses.
Figure 17: Moisten chest strap
To Next Page
Loading...
Need help?
General
