Precor QUEENAX PF175 2D - Cleaning

System Component Specification
Anchor bolt torque
1
[[[Undefined variable Specifications.QNX-
AnchorBolt]]]
Note: 1) see "Floor Anchoring Requirements" on page1
Cleaning
1. Wipe down equipment with recommended cleaning solution.
l General: 1 oz. mild soap to 30 oz. water. .
(missing or bad snippet)
2. Rinse using a clean lint-free cloth and dampened with water only. Dry completely with
another clean lint-free cloth.
See Also
"Introduction" on page1
"Getting Started" on page8
"Assembly and Installation" on page10
"Floor Anchoring Requirements" on page27
7
2 General Information
Cleaning