Precor QUEENAX PF175 2D - Page 32

Anchor Type Parameter Specification
Expansion
Anchor
Concrete Depth
1
[[[Undefined variable Specifications.QNX-Expan-
sionAnchorDepth]]]
Expansion
Anchor
Anchor Size [[[Undefined variable Specifications.QNX-
ExpAnchorLength]]]
Expansion
Anchor
Minimum embed-
ment Depth
1
[[[Undefined variable Specifications.QNX-
ExpEmbedment]]]
Chemical Anchor Concrete Depth
2
[[[Undefined variable Specifications.QNX-Chem-
icalAnchorDepth]]]
Chemical Anchor Anchor Size [[[Undefined variable Specifications.QNX-
ChemAnchorLength]]]
Chemical Anchor Minimum embed-
ment Depth
2
[[[Undefined variable Specifications.QNX-Chem-
icalEmbedment]]]
All Torque
1
[[[Undefined variable Specifications.QNX-
AnchorBolt]]]
Notes:1) Expansion anchors must have minimum 3-1/4” (8 mm) embedment.
Notes:2) Chemical anchors must have minimum 4” (10 mm) embedment.
See Also
"Getting Started" on page8
"Assembly and Installation" on page10
1
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 nM torque is equivalent to 5 newtons of force applied one meter from the center of the
bolt, 6 ft-lb is equivalent to 6 lb of force applied 1 foot away from the center of the bolt.
29
4 Assembly and Installation
Anchor bolt installation Summary