Prime Controls SD220 - Page 42

37
EC DECLARATION OF CONFORMITY
PRIME CONTROLS, INC.
4258 Gateway Circle
Dayton, OH 45440
USA
Name and address of the company established in European Community and
authorized to compile the Technical File:
ACC - Services Contact
105 route des pommiers
Centre Ubidoca
74370 St Martin Bellevue
FRANCE
PRIME CONTROLS, INC. declares under our sole responsibility that the product described as:
Equipment Name: Shell / Tab Detector
Generic Equipment Description: Used to detect defects on conversion presses
Model /Type: SD220 SD230
Complies with the requirements of the following European Union Directives:
Machinery Directive 2006/42/EC
Radio Equipment Directive 2014/53/EU
RoHS Directive 2011/65/EU
Main standards considered:
EN ISO 12100:2010
EN 61010: 2010
EN 50364: 2010
EN 301-489-1 V2.1.1, EN 301 489-3 V2.1.0
EN 300 330 V2.1.0
EN 50581:2012
Date: 2019-07-01 At: Dayton, Ohio USA
Name of authorized company representative: Ms. Beth Graves, President
Signature: Beth Graves {Electronic Signature}