Primus FF10 - Programming; General Programming Overview; Step 1: Program Menu

38 PROGRAMMING MANUAL 100962 G PUBLICATION DATE 24 JUN 2008.DOC
5. PROGRAMMING
5.1 GENERAL
Specific functions have been implemented in the Full Control wash computer to allow a detailed
programming.
T Functions for the complete program.
- Program Number : Selecting the wash Program
- Name : Insert or Modify the Name for the Program
- View : Inspecting the Program settings without making changes
- Edit : Adjusting a Program
- New : Creating a New Program
- Copy : Making a Copy of an existing Program
- Delete : Erase the Program
- Exit : Leave the Program Menu
T Functions for the program steps.
- Step Number : Selecting the Program Step
- Add : Adding a Program Step at the end of the program
- Edit : Adjusting the Program Step
- Insert : Adding a Program Step between two other steps
- View : Inspecting the Step settings without making changes
- Delete : Deleting a Step
- Exit : Leave the Program Step Menu
Follow the flowchart step by step.
5.2. STEP { : PROGRAM MENU
T HOW TO GET INTO THE PROGRAM MENU
The initialisation menu can only be accessed when the machine is in standby (the machine is
powered up but no program is started).
SELECT Process_ _ is displayed.
Turn the key switch to the program mode.
The Main menu is now available.
Press the ARROW DOWN button to select the Program Menu.
Press the ENTER button to confirm your selection.
Goto | °
Main Menu
PROGRAM