201
A Specifications
Printing
Type: Direct thermal or thermal transfer
Resolution: 203 dots per inch (8.0 dots/mm)
Print Speed: 2 to 6 ips (inches per second)
Bar Code Modulus: 10 mil to 127 mil “X” dimension in picket or
ladder orientation.
Maximum Print Width: 4.09 inches (103.9 mm)
Maximum Print Length: 47 inches using maximum 4.09 inch print width.
Reducing the print width extends the maximum
print length up to 99 inches.
Minimum Print Length: .500 inches
White Space Slew Rate: 2 to 6 inches per second
Minimum Dot Size: .0033 inches (0.083 mm) square
Label Backfeed: For label dispensing modes and optional media
cutter
Fonts:
Resident Fonts: Courier Bold, Triumvirate Bold Condensed, and
Letter Gothic scaleable outline fonts and bit-
mapped OCR-A, OCR-B.
Optional Fonts: A wide selection of scaleable outline
proportional and monospace fonts is available.
Font Expansion: All fonts expandable vertically and horizontally.
Bar Codes: Code 39, Interleaved 2 of 5, Code 128 (subsets
A, B, and C), Codabar, UPC-A, UPC-E, UPC 2-
& 5-digit addendums, EAN-8, EAN-13, EAN 2- &
5-digit addendums, Code 93, MSI Plessey,
UPCSHIP (IGP/VGL only), UCC 128, Postnet,
PDF 417 (IGP/PGL only), FIM.
To Next Page
Loading...
