68
Chapter 3 Menu Options
Emulation Menu
The LinePrinter+ emulation is the standard emulation on the printer, along
with a choice of IGP/PGL, or IGP/VGL. The CTHI emulation is available when
the Coax/Twinax option is installed.
The contents of the emulation menu structure will be created by the printer at
run-time, and, when powered up, the printer will automatically load the default
configuration values. The default set of parameters is the factory setting until
a new setting is saved to non-volatile memory.
NOTE: Each emulation may have a unique set of configuration options in
addition to those that are in the printer system list. See the
appropriate section at the end of this chapter for those settings.
EMULATION
from page 54
IGP/PGL
page 102
IGP/VGL
page 112
LinePrinter+
page 124
CTHI
page 148
To Next Page
Loading...
