58
Chapter 3 Menu Navigation
Follow these steps to save a new configuration:
1. Press the PAUSE key to take the printer offline. The following message
displays:
2. Press the
6 key until:
3. Press the
3 or 4 key until the following displays:
4. Press the
6 key until:
5. Press the
3 or 4 key to cycle through the options (1-8). Note that the
factory default configuration is not listed.
6. When the desired number displays, press ENTER to select it. The
following message displays briefly:
When processing is completed, the display shows:
NOTE: If the configuration number has been previously saved and the
Protect Configs. option is enabled under CONFIG CONTROL, the
following error message displays:
If the above occurs, see page 59, step 4.
It is recommended that you print your configuration and store it in a safe place
for future reference. Refer to page 60.
OFFLINE
CONFIG. CONTROL
CONFIG CONTROL
Load Config.
CONFIG CONTROL
Save Config.
Save Config.
1*
Saving
Configuration
Save Config.
X
*
CONFIG. EXISTS
Delete First
To Next Page
