13
8. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove and discard the six indicated
Screws (D). Next, lift off the Pulse Crossbar (93).
Remove and save the four indicated 1/4" x 1/2"
Screws (4); the Screws will be used in a later
step.
D
D
93
Console
Assembly
D
8
9. IMPORTANT: To avoid damaging the Pulse
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Pulse Crossbar (93) as shown. Attach
the Pulse Crossbar to the Handrails (86, 87) with
four #10 x 3/4" Screws (9) and four #10 Star
Washers (5). Start all four Screws, and then
tighten them.
93
5
9
9
5
86
9
87
4
4
To Next Page