EasyManua.ls Logo

Pro-Form fusion 2.1t - Part Identification Chart

Pro-Form fusion 2.1t
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
M6 Washer (36)
M8 Washer (37)
M10 Nylon
Locknut (35)
M8 x 15mm
Button Screw (39)
M8 x 25mm
Shoulder Bolt (44)
M8 x 62mm Button Screw (41)
M10 x 90mm Button Bolt (42)
M8 x 20mm Button
Screw (43)
M6 x 70mm Screw (45)
M6 x 43mm Button
Screw (46)
M6 x 75mm Button Screw (47)
M10 x 53mm Button Bolt (40)
M10 x 62mm Button Bolt (30)
M10 x 100mm Button Bolt (31)
M4 x 25mm
Screw (48)
M4 x 12mm
Screw (49)
PART IDENTIFICATION CHART
R
efer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST on page 18 of this manual.
Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached. If a part
is missing, call the toll-free telephone number on the front cover of this manual.

Related product manuals