Pro-Form fusion 2.1t - M10 X 90 Mm Button

7
3. Attach the Rear Upright (5) to the Base (1) using
the indicated M10 x 90mm Button Bolts (42) and
t
wo M10 Nylon Locknuts (35). D
o not tighten the
Nylon Locknuts yet.
4. Attach the Rear Top Frame (6) to the Rear
Upright (5) with two M10 x 90mm Button Bolts
(42) and two M10 Nylon Locknuts (35).
Do not
tighten the Nylon Locknuts yet.
5
3
35
35
42
1
6
35
42
4
5