EasyManua.ls Logo

Pro-Form Power 995c - Handrail Attachment

Pro-Form Power 995c
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
6. Attach the Left Handrail (83) to the Left Upright
(79) with two 5/16" x 2 1/2" Screws (10) and
two 5/16" Star Washers (11). Make sure that
the Upright Wire (78) is resting to the side as
shown and is not pinched. Fully tighten the
Screws.
Attach the Right Handrail (86) with two 5/16" x
2 1/2" Screws (10) and two 5/16" Star Washers
(11). Fully tighten the Screws.
Remove the wire tie from the Upright Wire (78).
88
6
86
83
79
78
11
10
11
10
7. If there are four screws (C) in the locations
shown, remove and discard them.
7
C
C
Wire
Tie

Related product manuals