pro.point PROCUT45 - Specifications

8611303 PROCUT45 PLASMA CUTTER V1.1
2 For technical questions call 1-800-665-8685
SPECIFICATIONS
Input Power
230V AC (28A)
Phase
Single
Output Current Range
96V (20 to 45A )
Efficiency
90%
Duty Cycle at 104 °F (40 °C)
30% @ 45A
Open Circuit Voltage
250V
Welding Capacity
Cut
1/2 in.
Sever
1 in.
Air Flow
Pressure
75 PSI
Rate
6.7 CFM
Insulation Class
H
Protection Class
IP21S
Plasma Torch Cable Length
19 ft
Ground Cable Length
13 ft
INTRODUCTION
The Pro.Point PROCUT45 Plasma Cutter is an inverter-based
plasma cutting machine produced using the latest in IGBT
technology. This machine is reliable, robust and stacked with
features that you can expect from a quality plasma cutter.
The PROCUT45 produces a high temperature plasma stream
providing effortless cutting of all electrically conductive
materials including steel, cast Iron, stainless steel, copper,
aluminum, brass, etc. The PROCUT45 is suitable for a wide
PROCUT45
PLASMA CUTTER