8611303 PROCUT45 PLASMA CUTTER V1.1
20 For technical questions call 1-800-665-8685
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and
inspect for damage. Make sure that all items in the parts list are
included.
Contents:
• Plasma Cutter Machine
• Plasma Cutting Torch (SKU 8612541)
IDENTIFICATION KEY
A Overheating Indicator - Light shows that the
machine has shut down due to a thermal
overload. The light will remain on until the
machine has cooled and is ready for use again.
To Next Page
Loading...
