V1.1 PROCUT45 PLASMA CUTTER 8611303
Visit www.princessauto.com for more information 33
3. Exposure to extremely dusty, damp, or corrosive air is
damaging to the plasma cutting unit. In order to prevent
possible failure or fault of this equipment, clean the dust at
regular intervals with clean and dry compressed air.
4. Follow instructions for lubricating and changing accessories.
5. Only use accessories intended for use with this tool.
6. Keep the tool handles clean, dry and free from oil/grease at
all times.
7. Maintain the tool’s labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
To Next Page
Loading...
