Pro Spot i5 - Page 32

All Info Copyright © Pro Spot International Inc.
4 - Operation
Page 14
i5
4.2.3 i5 Touch Screen Control
32
Welding in Single Sided Mode
1. Select the Weld Tip and Program
Press the weld Tip selection button on the main Manual
Mode screen, then select the tip you are using.
PRO-66
Pro Pull
PS-870
Rivet Welding
CLP-70
Spot Hammer
PS-210
Nail Dent Pulling
PS-870
Contact
Shrinking
PS-830
Bolt Welding
PS-870
Nut Welding
CLT-29
Carbon Shrinking
PS-840
Washer Dent
Pulling
Then select a weld program, each tip has 16 different pre-set
weld programs.