30
english
SETTING THE STOPWATCH LAP FUNCTION - AUTO LAP
Auto LAP function automatically times laps based on either a pre-set time or distance.
1. From the Lap Setting Menu, Select AUTO by pressing the Option or EL key. Press the
MODE key.
2. Select DISTANCE or TIME by pressing the Option or EL key. Press the MODE key.
SETTING DISTANCE-BASED LAPS:
Adjust distance (.5 – 18.5 miles/30 km) by pressing the OPTION or EL key. Press the
MODE key to return to operating mode.
SETTING TIME-BASED LAPS:
4. Adjust minutes by pressing the OPTION or EL key. Set Minutes and advance to set
hours by pressing the MODE key.
5. Adjust hours (0-9) by pressing the OPTION or EL key. Press the MODE key to return to
operating mode.
PROGRAMMING THE CYCLECOMPUTER
SELECT AUTO SELECT TIME OR
DISTANCE
ADJUST:
PRESS OPTION OR EL
PRESS MODE TO EXIT
SETTING
To Next Page
Loading...
