8
english
The PRO Scio 4.1 features a wireless heart rate transmitter, powered by a CR2032 3v
Lithium battery. Under normal conditions you can expect to get approximately 700-800
hours of heart rate transmitter use with a fresh battery.
Using a coin, turn the battery door counter clockwise until the door
comes free of the watch.
2. Take care not to damage the O-ring seal for the battery compartment
and carefully remove the old battery.
3. Place a new battery in the battery compartment with the positive (+)
side toward the battery door.
4. Place the battery door over the opening and tighten it down by using
a coin and turning in a clockwise direction.
5. If the O-ring has been damaged, replace it before reinstalling the bat-
tery door. Most jewelers and watch shops should have replacement
O-ring seals.
./4% Extreme care should be taken when replacing the battery to ensure
the unit remains fully water resistant. Failure to properly replace the bat-
tery and correctly seal the unit may cause the unit to become damaged and
may void the warranty.
CHANGING THE BATTERY IN THE HEART RATE
TRANSMITTER BELT - PRO SCIO 4.1
To Next Page
Loading...
