10 © 2016 Proceq SA
3.2 Measurements Screen
3.2.1 Controls
File Name: Enter the file name
and tap return. Saved measure-
ments will be stored automati-
cally. If filename management
is activated, this function is
locked.
Measurement Mode:
Switch between
measurement and conversion.
Time and battery status
Settings: direct shortcut to
settings menu.
(only applicable to the
actual measurement series)
Save: Store measurement data.
Delete: Delete the last measurement.
Wizards: Direct
access to wizards.
Redo: Restart the measurement series
or a single measurement.
Measurement Scale: Select the hardness
scale (primary and secondary) to be displayed
(not available for Leeb U).
Material: Select the
material group to use
for conversions (not
available for Leeb U).
Impact Direction: To
manually set the impact
direction if required
(Leeb only, by default
this is automatic).
Figure 8: Measurement Screen
To Next Page
Loading...
