Manual Profound VIBRA-series, version 2.00
39
5.8 Option 'Send E mail' (VIBRA
+
-option)
This menu option is only available in the VIBRA
+
. To send a data e-mail containing the peak data (except
traces) of the past 24 hours, press the 2-key OK. Of course, a SIM card should be installed in the VIBRA
+
and the modem settings should be correct. Please find a detailed description in chapter 7.
5.9 Switching Off
Press the 1-key OFF in the main menu to switch off the VIBRA. If you are in a submenu, press 1
twice to switch off. Before switching off, the VIBRA will automatically store all data and settings in its
memory. If an on/off time has been set, the system will notify you and ask for activation. See also
paragraph 4.2.5
5.10 Memory and battery
On the display of the VIBRA the remaining battery power (left) and memory space (right) is continuously
displayed:
In short:
• to check remaining battery power: the fuller the indicator, the longer the VIBRA can operate
without changing batteries.
• to check remaining memory: the emptier the indicator, the more memory space is available for
storing measuring values and traces.
While measuring remaining battery power and memory can also be checked in the measuring
menu, whereby:
- Peak = measured and saved peak values in % of the peak memory
- Trace = measured and saved traces, minimally 1 with a maximum of 9 per hour
in % of the trace memory
- Bat. = % remaining battery power
Batteries
The VIBRA operates with 3 D-format, 1.5V alkaline batteries. When these batteries are new, they can
supply the VIBRA with power during a period of approximately 28 days. The fuller the indicator on the
bottom left of the display, the longer the VIBRA can still be operational.
To Next Page
Loading...
Need help?
General
