Profound VIBRA Series - Page 6

Manual Profound VIBRA-series, version 2.00
6
• Professional and fast (graphical) presentation of the monitoring results.
• The possibility to attach an external alarm beacon to the system.
• Real-time interpretation and verification of the vibration levels against ruling codes.
• Easy comparison of measuring results: more than one VIBRA can be installed at the same
location and the units are easily synchronized.
Specific advantages of the VIBRA
+
• Full compliance with DIN 4150 - part 2 and 3 including:
o Simultaneous measurements
o Dominant frequency determination with FFT method
o Software processing
o KBft and KBfmax
• Smart alarm (frequency dependent alarm)
• Daily status and data e-mail by GPRS/internet
• E-mail alarm
• Peak displacement recorded for each channel
• Automatic level- and calibration checks
Manual
In the next chapter of this manual you will find a short section about getting started. In chapter 3 the VIBRA
equipment guidelines are given with regard to maintenance, exchanging batteries, etc. How to monitor
vibrations is explained in chapter 4. Chapter 5 gives a detailed description of the VIBRA menu options. In
chapter 6 you will find directions for the processing of the measurement data. If you purchased a VIBRA
+
,
chapter 7 gives a detailed description of activating the data read-out by mobile connection. Please find a
short getting started in chapter 2.
Author: A.J. van Rietschoten, BA
To simplify reading, the manual uses the name VIBRA for each VIBRA model
(whether
VIBRA, VIBRA-sbr, or VIBRA+) unless specifically mentioned.