7
CYBER 192
2.4 ADDRESSING
The CYBER192 allows you to program 12 scanners with 8/16 DMX channels each. You have to address
every projector to the respective starting address. Please note that the DMX operator assigns the DMX
starting addressed every 16 steps (see chart).
NOTE - All projectors with the same starting address work synchronically.
CHART FOR DMX ADDRESSING
Fixture or
scanner #
Default DMX
starting address
Binary Dipswitch
setting
1 1 1 ("On" position)
2 17 1, 5 ("On" position)
3 33 1, 6 ("On" position)
4 49 1, 5, 6 ("On" position)
5 65 1, 7 ("On" position)
6 81 1, 5, 7 ("On" position)
7 97 1, 6, 7 ("On" position)
8 113 1, 5, 6, 7 ("On" position)
9 129 1, 8 ("On" position)
10 145 1, 5, 8 ("On" position)
11 161 1, 6, 8 ("On" position)
12 177 1, 5, 6, 8 ("On" position)
To Next Page
Loading...