ProLights CYBER192 - Delete Scene; Delete All Scenes; Bank Copy; Bank Delete

11
CYBER 192
4.4 DELETE SCENE
1. Locate the scene in the program BANK. Use [BANK UP]/ [BANK DOWN] to navigate program banks.
2. Press and hold the [AUTO/DEL] button while pressing the SCENE you want to delete.
NOTE - The action of deleting a scene is actually a value reset to 0 on all DMX channels available to the
scene memory. The physical location of the scene memory remains.
4.5 DELETE ALL SCENES
• Press and hold the [PROGRAM] button and the [BANK DOWN] while you turn the controller On.
NOTE - All scenes should be erased when the controller is turned back on.
4.6 BANK COPY
1. Press the [PROGRAM] button for 3 seconds.
2. Locate the program BANK. Use [BANK UP]/ [BANK DOWN] to navigate program banks.
3. Press and release the [MIDI/ADD] button.
4. Locate the destination program BANK. Use [BANK UP]/ [BANK DOWN] to navigate program banks.
5. Press the [MUSIC/ BANK-COPY] button to compete copy.
NOTE - The LCD display will blink to indicate a successful copy.
4.7 BANK DELETE
1. Press and hold the [PROGRAM] button for 3 seconds.
2. Locate the BANK to delete. Press the [AUTO/DEL] and [MUSIC/ BANK-COPY] at the same time to delete the
Bank.
NOTE - The LED display will blink to indicate a successful delete.