ProLights CYBER192 - Music Run Chases (Playback Chases); Auto Run Chases; Runnig Sequential Chases

To Next Page

To Previous Page

CYBER 192

6.6 MUSIC RUN CHASES

1. Press any one of the [CHASES] buttons.

2. Press and release the [MUSIC/BANK COPY] buttons. The corresponding LED will blink in the display.

3. Your chase will now run to sound.

6.7 AUTO RUN CHASES

1. Press any one of the CHASE buttons.

2. Press and release the [AUTO/DEL] button. The corresponding LED will blink.

3. Adjust the SPEED and FADE faders to your liking.

4. You can override the speed and fade time by tapping the TAPSYNC/DISPLAY button (three) times. The

chase will now run on the interval time of the taps.

NOTE - The fade setting should never be slower than the speed setting or the scene will never complete

execution.

6.8 RUNNING SEQUENTIAL CHASES

1. Press either AUTO DEL or MUSIC BANK COPY buttons to select the trigger mode.

2. Press the CHASE button for each chase you wish to playback.

3. Adjust the Chase speed by changing the SPEED fader.

NOTE - Chases must already be programmed.

The chases will run in the order they are pressed.