ProLights EVO64CYC - Static Configuration; Editing Custom Programs; Special Functions

17
EVO64CYC
3.13 STATIC CONFIGURATION
To set the custom balance of red, blue and green:
• Press the button MENU, then press the button UP/DOWN so many times until the display shows [STAT].
Press the button ENTER to conrm.
• Select the color red, green, blue, white or amber (RED - GREN -BLUE - WHITE - AMBER) through the buttons UP/
DOWN and then press the button ENTER.
• Set the value (000 - 255), through the buttons UP/DOWN.
• Set the value of the [STRB] tra (0 - 20) through the buttons UP/DOWN.
3.14 EDITING CUSTOM PROGRAMS
To set the custom balance of red, blue and green:
• Press the button MENU, then press the button UP/DOWN so many times until the display shows [EDIT].
Press the button ENTER to conrm.
• Select the program PR.01 - PR.10.
• Each custom program has 30 steps that can be edited.
• Each step allows the creation of a scene using red (RED), green (GREEN), blue (BLUE), white (WHITE), amber
(AMBE), (STRB), (TIME) and (FADE).
• Set the value (000 - 255), through the buttons UP/DOWN.
3.15 SPECIAL FUNCTIONS
Press the button MENU and select through the directional buttons the [SETTINGS] mode; and press the but-
ton ENTER to conrm.
NOTE - The factory access password is UP + DOWN + UP + DOWN. Press ENTER to conrm the access.
It is possible to view to following functions:
UPLOAD
• Select [UPLd] to upload the custom programs from the current Master unit to the Slave units.
• In order to activate the upload function the password must be entered. Password is the same as the
main access password.
REST
• In order to reset custom modesto default values select [REST].
COLOR
• [COLO] is for activate/deactivate the color calibration functions.
- When [RGBW] is selected, on RGB =255, 255, 255 the color is displayed as calibrated in CAL2
(RGBW).
- When [COLOR] is set [OFF], on RGB =255, 255, 255 the RGB values are not adjusted and the output
is most powerful.
- When [UC] is selected, the RGB output adjusted to a standard preset universal color which
balances xtures from dierent generations.
DIMMER
• Enter [dIMX] to select dimmer mode and dimmer speed. When dimmer is set to [OFF], the RGBW and
MASTER DIMMER are linear. The Dim1/2/3/4 are speed modes of the non linear dimmer, [DIM1] is the
faster, while [DIM4] is the slowest.
NOTE - The factory default setting is [DIM4].