ProLights MOBY40 - Static Configuration; Editing Custom Programs; Special Functons

MOBY40
20
3.14 STATIC CONFIGURATION
To set the custom balance of red, blue and green:
• Press the button MENU, then press the button UP/DOWN so many times until the display shows [STAT].
Press the button ENTER to conrm.
• Select the color red, green or blue (RED - GREN -BLUE- AMBR) through the buttons UP and DOWN and then
press the button ENTER.
• Set the value (000 - 255), through the buttons UP/DOWN.
• Set the value of the [STRB] tra (0 - 20) through the buttons UP/DOWN.
3.15 EDITING CUSTOM PROGRAMS
To set the custom balance of red, blue and green:
• Press the button MENU, then press the button UP/DOWN so many times until the display shows [EDIT].
Press the button ENTER to conrm.
• Select the program PR.01 - PR.10.
• Each custom program has 30 steps that can be edited.
• Each step allows the creation of a scene using red (RED), green (GREEN), blue (BLUE), amber (AMBR), (STRB),
(TIME) and (FADE).
• Set the value (000 - 255), through the buttons UP/DOWN.
3.16 SPECIAL FUNCTIONS
Press the button MENU and select through the directional buttons the [SETTINGS] mode; and press the but-
ton ENTER to conrm.
It is possible to view to following functions:
KEY
This menu allows the user to adjust key operation settings for this xture. Select [ON] for automatic lock
out. Password to re-enter the display is UP + DOWN + UP + DOWN
UPLD
• Select [UPLD] to upload the custom programs from the current Master unit to the Slave units.
• In order to activate the upload function the password must be entered. Password is the same as the
main access password.
• When uploading the Master and Slave units will display yellow.
• If an error occurs when uploading the Master and/or Slave units will display red.
• On successful uploading of the custom programs the Master and Slave units will display green.
REST
• In order to reset custom modesto default values select [REST].
COLOR
• [COLOR] is for activate/deactivate the color calibration functions.
- When [RGBW] is selected, on RGB =255, 255, 255 the color is displayed as calibrated in CAL2
(RGBW).
- When [COLOR] is set [OFF], on RGB =255, 255, 255 the RGB values are not adjusted and the output
is most powerful.
- When [UC] is selected, the RGB output adjusted to a standard preset universal color which
balances xtures from dierent generations.