3
SMARTBATPLUS
- 1 - INTRODUCTION
1.1 DESCRIPTION
SMARTBATPLUS is the new outdoor IP65 version of the popular SMARTBAT, enlarging the possible applica-
tion of this luminaire even in outdoor venues or for architectural applications. SMARTBATPLUS is equipped
with a lithium battery pack and a built-in WiFi module for cable- free operation. The ultra- compact and
lightweight design makes this projector truly portable and rechargeable countless times without “mem-
ory eect “. The internal battery has an autonomy for 12 hours in color change mode and up to 8 hours in
full output, while the charging time is only 4 hours. The light source is composed of 4x10W high-power
RGBW LEDs / fullcolor for a color calibration in the full-spectrum and the extractable foot allows you to
adjust the angle of the beam to assist tracking operations. Dierent control modes are available on-board,
like 2.4GHz WDMX with built-in antenna, infra-red transmission by remote control and classic wired DMX.
1.2 TECHNICAL SPECIFICATIONS
LIGHT SOURCE
• Source: 4x10W RGBW LEDs
• Luminous Flux: 2064lm
• Lux: 2064lux @3m
• Source Life Expectancy: >50.000 h
OPTICS
• Beam Angle: 11°
• Field Angle: 19°
COLOR SYSTEM
• Color Mixing: RGBW/FC
• White Presets: 3200-9000K
• Color Wheel: Virtual color wheel with presets
• Macros: Built-in white presets
DYNAMIC EFFECTS
• Static Color Mode: Selection of static color
• Manual Color Mode: Manual adjustment of color
• Auto Mode: Built-in programs with execution speed adjustment
BODY
• Tilt Angle: 20° Adjustable foot support for tilt regulation (up to 20°)
• Body: Sturdy die-cast aluminium body conceived for long-time durability
• Body Color: Mirror nishing
CONTROL
• Protocols: DMX512
• Dmx Channels: 3/4/6/10ch
• W-DMX: Included, Wireless Solution receiver
• Display: Black OLED touch display
• Firmware Upgrade: Yes, via USB-DMX interface (UPBOX1) not included
• IR: Infra-Red sensor controlled by remote
To Next Page
