ProLights SmartBat Plus - Auto Show; Static Color

9
SMARTBATPLUS
3.5 AUTO SHOW
This xture has a built-in automatic program. To access this, please see the below instructions:
• Press the MENU button so many times until shows [Autoshow].
• Press the ENTER button to conrm.
• Using UP/DOWN button, select one of the programs [Auto 1 - Auto 5].
• Press the ENTER button save the setting.
• Using UP/DOWN button, select the speed value of the show [S1 - S100].
• Press the ENTER button save the setting.
3.6 STATIC COLOR
This xture has the ability to accept custom static color settings. Access these chases via the control panel
on the back of the xture.
• Press the MENU button so many times until shows [Static ].
• Press the ENTER button to conrm.
• Press the MENU button so many times until shows [Fixed Color].
• Press the ENTER button to conrm.
• Using UP/DOWN button, select one of the programs [R,G,B,W,.....,RGB,....,RGBW].
• Press the ENTER button save the setting.
6 DMX Address
ð
001 - 509
7 DMX Channel
ð
4 Ch
6 Ch
10 Ch
HSV
HSI
8 White Balance
ð
R
ð
125 - 255
G
ð
125 - 255
B
ð
125 - 255
9 Wireless Setting
ð
Receive On/O
ð
On
O
Receive Reset
ð
No
Yes
10 IR Setup
ð
On
O
11 Key Lock
ð
On
O
12 Factory Reset
ð
No
Yes