PROLiNK MASTER II Series - Page 14

12
TURN ON UPS TURN OFF UPS
 Battery Test
It will show “Start Battery Test” if the UPS is not in test. Touch “Yes” to start battery test. Then, it will
start battery testing. After few seconds, battery test result will show on the screen. Touch “Back” to
return to main screen immediately or “No” to cancel this operation and back to main screen.
It will show “Stop battery test” if the UPS is in test.
Battery Test Cancel Battery Test
 Mute All
It will show “Mute all” if the audio is active. Touch “Yes” to activate mute. If “Mute all” is active, it will
show icon on the top left corner of the main screen. Touch “Back” to return to CONTROL screen
immediately or “No” to cancel this operation and back to CONTROL screen.
It will show “Cancel mute all” if the UPS is mute already. Touch “Yes” to activate audio function or
“No” keep mute. Touch “HOME” will return to CONTROL screen.
Mute All Cancel Mute all